CONSTRUCTIONS

CORROSION-RESISTANT PRODUCTS

Corrosion-resistant products are carried out from material AISI 304, it’s Wr. Nr. 1.4301 A2 in polished, 240 grain size, and finely milled or fine milled satinirani 320.

Polishedhighly polished, highly illuminating, or elektropolirane, in the Visual-glossyformat (matte, gloss). The fence next to the sea, where the influence of seawater orsalt; in fact, on the shore of the salt is mixed with sand and the wind blowing the sand with salt up to 500 m in the Interior; Therefore, up to 1 km by the sea in the Interior carried out decorative objects from material AISI 316 L, or in better quality back in the same forms of finely polished or glossy. Fences, which are directly in contact with sea water, they must be elektropolirane, where the reduced roughness on Ra 0.4 – 0.8 µ and thus remove all oxides, smoothness and thus hinder limescale particles on the fence. The fence should be compulsory in the pool are earthed, and that as a result of static electricity electrostatics, where we get the galvanic article and thusoxidized screws or parts of surfaces. There is no material error, but that they are earthed. Detajlnejše a statement of reasons or requirements it is necessary to consult with our designers.
Corrosion-resistant products:
  • Straight, circular and spiral stairs, railings
  • Sliding self, single and double-leaf doors
  • Built-in canopies and angular
  • Enoramna, dvoramna, and spiral staircases
FORGED PRODUCTS
Forging is the artistic way of creating metals. When hot materials, the material formpremenijo squeezing is enhanced workpiece combines elegance and strength. In the design of either hot or cold, we produce high-quality forms of forged products.The company design wrought iron products according to your wishes and give you a professional advice regarding the design of the entire product looks like.

Forged products shall be carried out from a material St 37, this is to protect the steel with hot-dip galvanizing (coating up to 120 microns) then the products bi colored in different colors according to the product in many years, ageing then RALU black: gold, silver, copper, green, blue, … Detajlnejše a statement of reasons or requirements it is necessary to consult with our designers.
Forged products:
  • Straight, circular and spiral stairs, railings
  • Sliding self, single and double-leaf doors
  • Built-in canopies and angular
  • Enoramna, dvoramna, and spiral staircases
  • Window shields
  •  the lights and stands for flowers.

GLASSWARE
For glass products, it is necessary to mount the glass area on pillars laid down or in the ground and the distance of the pillars is determined by the thickness of the glass (single, double, triple laminated). Most ran 8 or 10 mm hardened, transparent or etched mat (of sandblasted) following the edges of the cut and polished for greater ranges, use laminated glass 2 x 5 mm; 2 x 6 mm; 2 x 8 mm; 2 x 10 mm. glass can also be glued to each other with gishards glue laminated with an intermediate film. Therefore determined on the basis of the application design engineer project.

Machining of tempered glass
Because of the characteristic distribution of tensions later tempered glass cannot be processed (for example, cutting, drilling, grinding etc.). Any such intervention wouldcause collapse of the voltage balance and the glass would break. This means that we perform heat treatment only after they are completed, all other types of processing.
Tempered safety glass has a very wide scope.

The purpose and use of the.

It is appropriate for:

  • residential and commercial buildings (stairs, doors, automatic doors, predeine walls,sliding walls)
  • facades (parapeti)
  • sports facilities (resistant to impact with a ball)
  • be installed in the vicinity of hot bodies
  • use in protective purposes (protection from falling on the stairways, balconies, fences)
  • external applications (noise protection on roads, shelters, advertising panels, showcases, etc.).